Image

Chevron Conveyor Belts

Chevron conveyor belts improve conveyor productivity by preventing the roll back of materials when operating on steep inclines. Our range of chevron conveyor belts are designed to improve operational efficiency and throughput of material when you’re conveying on an angle greater than 18 degrees.

Benefits of Chevron Conveyor Belts
Chevron conveyor belts are specially designed to cope with the frequent flexing required during use. As well as preventing the roll back of materials, they save space (due to a smaller footprint), increase carrying capacity, provide a reduction in structural and power consumption costs, reduce spillage and material loss, and have a flexible belt construction that can wrap around small pulleys.

Largest stockist in WA
We have over 8km of chevron conveyor belting onsite and readily available. As the largest stockist in WA, we have a variety of profiles available to suit a wide range of applications. They also come with wear resistant covers and cleats to provide a high service life. Popular profiles are outlined in the table below:

Profile Belt Width Cleat Width Cleat Height Uses
Sergeant 350-900mm  350-900mm 6mm Low to moderate inclines.
V-Cleat 450-1200mm 385-750mm 15mm Good all round performance for moderate inclines.
Bull Horn 1200-1600mm 1000mm 25mm Heavy industrial applications with inclines over 28 degrees. Suitable for lump sizes up to 30mm.
Multi-V 1830mm 1830mm 6mm Low to moderate inclines with a high speed output.


Applications
Chevron conveyor belts are commonly used in stone aggregate handling, limestone conveying in cement plants, scrap handling and wood chips. They’re also used in agriculture for conveying grain or canola seeds.

Get in Touch
Contact our sales team on +61 8 9370 5577 to have a chat about our range of chevron belts or click on the product enquiry link below. You can also email info@allrubber.com.au for more information. 

Product Specifications

Common Widths Refer to Technical Information Sections
Belt Length Range 'L'-160m, 'H'-120m
Carcass Variety Available EP
Common Belt Rating 200 to 800 KN/M
No. of Plies 2ply to 4ply
Rubber Cover Grades N / M / SAR / HR / OR
Rubber Cover Thickness Min. 3.0mm top and 1.5mm bottom or bare back
Rubber Black
Surface Finish Cleat on top Covers only
Edge Cut or Moulded Edge
Splicing Method Hot Splice / Cold Splice / Mechanical Splice

 

Technical Information

Product Enquiry

Have a question you'd like answered?